2021-04-02
MATERIAL ADVANTAGE Carbon fiber has been used on bicycles as a high-tech material for the last ten years.Carbon fiber is not strictly a carbon element, but a mixture of carbon elements that are braided and bonded and reinforced by epoxy resin.Carbon fiber is a new type of composite material, which has the advantages of light weight, high specific strength, high specific stiffness.We choose carbon fiber due to the higher tensile strength, tensile stiffness, and the excellent weight-to-stiffness ratio.Different carbon fiber has a different weight-to-stiffness ratio.
2021-04-02
ONE-PIECE LAYUP DESIGN The layer-up of each carbon rim is carefully designed, repeated tests and then determine final standards document. After that,we’ll send it to our layer up workers, who operate according to the operating standards. They cut the size of the material according to the layer- up instructions to produce materials for any part that can be used to increase the strength of the side part of the wheel set, to fit the grooves of the rims, to enhance the impact resistance of the wheels.
2021-04-02
HIGH TG RESIN BRAKE SURFACE The material is a combination of high temperature resistant epoxy resin and carbon fiber.It has excellent heat resistance and the highest test temperature values can be up to 250 degrees Celsius.In general,the maximum of rim TG resin can only reach 180 degrees when biking at high speed.
