29er-I30-D18.5 Asymmetric Carbon MTB Rims And Wheelsets Shallow Profile All Mountain&Enduro Bike

USD:0 | Approx Weight: 0g
  • TECH
  • Product
    Item: A29C30D18 Warranty: 3 Years
    Size: 29er Material: Toray (SD:T700 | SL:T700+T800) Rim Type: Clincher & Hookless Tubeless: Compatible ERD: 602mm Outer Width: 37mm Inner Width: 30mm Depth: 18.5mm Offset: 3mm Spoke Hole Angle: ±6° Spoke Hole Dia: 4.5mm Valve Hole Dia: 6.5mm Assembly Hole Dia: 7.5mm Weight: AM:400±15g | DH:450±15g | SL:360±15g
    Weave: UD/3K/3K Twill/12K/12K Twill/others Finih: Matte/Glossy/Satin/Paintless/Colored/Others Hole Count: 12H~36H
    Weight Limit: ≤120kg Tire Size: 2.2"~2.7" Spoke Tension: 120~145kgf Tyre Pressure: 20~70psi
    All Mounttion: AM | SL Enduro: DH Down Hill: DH
  • All of our EIE rims share the following manufacturing technologies:

    1.Super light Weight

    T700:The standard XC/AM/DH version were constructed Premium Toray T700 Carbon fiber.

    T700+T800 component:The super light series EIE carbon rim were constructed with properly component of Toray T700+T800.We cut the material size of the nipple bead area and strengthen the key parts of spokes to maintain the strength of the overall carbon rims.


    The layer-up of each carbon rim is carefully designed, repeated tests and then determine final standards document. After that,we’ll send it to our layer up workers, who operate according to the operating standards.

    They cut the size of the material according to the layer- up instructions to produce materials for any part that can be used to increase the strength of the side part of the wheel set, to fit the grooves of the rims, to enhance the impact resistance of the wheels.

    All EIE's carbon rims were manufactured by a one-piece continuous layer. This uninterrupted layer not only produces a stronger rim, but a lighter one!

    3.Angled Hole Drilled By CNC Machine

    The spoke hole angle design of the rim is very important , but its design angle range is limited .

    If the design does not match the design of the spoke hole angle of the hub , the bending phenomenon of the spoke can be generated .

    When our EIE carbon rims drill angled holes, the spacing and angle of each hole are calculated accurately to ensure that when the rim is connected to the drum through the stripes, no additional pressure is generated around the rim hole.

    We use a high speed CNC machine to drill all the holes to avoid spoke holes area carbon fiber strength reduction ,thus making the wheels build stronger

    4.Smooth Rim Inside Surface

    The air bladders are made from a special material which has ability to produce very smoother walls, result in a lighter rim, and are completely removed without harsh chemicals.

    They are removed through the valve hole with a unique process by a skillful workers .So you would not see any patched hole on rim bed,that produces a stronger rim.

    5.Wider Tire Size Ranges

    Inner Rim Wide(mm)











    Tire Size 1.9"

    Tire Size 2.0"

    Tire Size 2.1"

    Tire Size 2.2"

    Tire Size 2.3"

    Tire Size 2.4"

    Tire Size 2.5-2.7"

    Tire Size 2.8-3.1"

  • EIE Carbon offer this warranty is aimed to ensure that all products we sell are free from defects and all passed the QC test before shipment.
    EIE Carbon carries 2-year warranty (from the date of purchasing) for all carbon bike rim we sell including the existing MTB rims ,road rims,fat bike rims,BMX rims and upcoming new models.

    EIE Carbon Offer Warranty For Rims 

    1.Within 6 months from date of purchase:

    If the rim quality issue is caused by manufacturing defects. EIE Carbon will send you the free replacement rim and bear the re-sending freight,but other expenses shall be adsorbed by the buyer.

    2.After 6 months from date of purchase:

    Free replace the damaged rims. EIE Carbon and customers shall bear 50% of the freight cost respectively.

    EIE Carbon Offer Warranty For Wheels 

    1.Within 6 months from the date of purchase


    If the wheels quality is caused by rim manufacturing defects.EIE Carbon will send you the free replacement rim,bear the reshipment’s freight and compensate $30 for customers to rebuild wheels in local bike shop,but other expenses shall be adsorbed by the buyer.


    If the wheels quality is caused by rim manufacturing defects.Customer is not allowed to use the wheels and EIE has right to ask buyer to send the whole wheels back to us.We will rearrange to send new wheels to customer after receiving the returned package within 2 weeks .In this case ,EIE will bear the shipping cost for returned package $50 at best as well as the shipping cost for resent package.The shipping cost of returned package will be refunded to customer by PayPal.The other expenses shall be adsorbed by the buyer.

    If the wheels quality is caused by rim manufacturing defects and EIE does not need customer to send it back to us.EIE will send new free replacement rim to customer,bear the reshipment's freight and compensate $30 for customers to rebuild wheels at local bike shop,but other expenses shall be adsorbed by the buyer.

    Extra problems like accessories please contact customer service for assistance

    2.After 6 months after the date of purchase:

    If the wheels quality is caused by rim manufacturing defects.EIE Carbon will send you the free replacement rim as well as bear the reshipment's freight .But other expenses shall be adsorbed by the buyer.

    More at WARRANTY page.
  • visitor mats lövsund 2020-11-15
    Hello, What is the deliverytime for a pair of A29C30D18 SL in UD 32 spoke? Cost to 68620 Finland, and do you ship DDP? (I have not uesd Eie before) Cheers Mats

    EIE EIE Carbon:

    Hi Mats, Thanks for your inquiry. We generally need to take around 8-10 business days for manufacturing .And current transportation time to Finland by EMS will take 2-4 weeks . We have XDB service that could include taxes service .By XDB service (taxes included)will take 3-5 weeks. 2pcs rims to Finland by XDB will take US$120 .You can have a try with our product,I am sure that you would be surprised . If further questions ,please feel free to contact us. Thanks EIE Carbon


  • visitor matt moran 2020-11-20
    Hi, I am looking at the superlight version of. I weigh 150 lbs. Do you recommend the superlight version for trail (not XC) use for my weight? Or should I go with the AM version?

    EIE EIE Carbon:

    Hi Matt, Thanks for your inquiry. We will recommend our super light version which is strong enough for your cycling.AM is more suitable for heavier rider whose weight more than 90kg. Hope the information helps you. Thanks EIE Carbon


  • visitor JT 2021-04-10
    do you have any plans to make a 650b version of this rim?

    EIE EIE Carbon:

    @JT Sorry for that. We do not have plan to open 650b of this rim at present.We hope to be futured project sooner. We will inform you when 650B is available here. Thanks EIECarbon