A29C26D18 XC CARBON RIMS AND WHEELS

29er-I26-D18.5 carbon fiber MTB rims and customized XC wheels asymmetric shallow profile tubeless compatible

BUY NOW
Rims
Wheels
USD:0 | Approx Weight: 0g
  • SPECS
  • TECH
  • WARRANTY
  • Product
    Item: A29C26D18 Warranty: 3 Yeras
    Basic
    Size: 29er Material: Toray (SD:T700 | SL:T700+T800) Rim Type: Clincher & Hookless Tubeless: Compatible ERD: 602mm Outer Width: 32mm Inner Width: 26mm Depth: 18.5mm Offset: 3mm Spoke Hole Angle: ±6° Spoke Hole Dia: 4.5mm Valve Hole Dia: 6.5mm Assembly Hole Dia: 7.5mm Weight: XC:360±15g | SL:320±15g | UL:290±15g
    Customization
    Weave: UD/3K/3K Twill/12K/12K Twill/others Finih: Matte/Glossy/Satin/Paintless/Colored/Others Hole Count: 12H~36H
    Recommendation
    Weight Limit: ≤100kg Tire Size: 2.1"~2.7" Spoke Tension: 120~145kgf Tyre Pressure: 20~70psi
    Application
    Cross County: XC| SL | UL
    Note
    1: SD(Standard/Common) version is constructed by fully carbon fiber T700 . 2: SL(Superlight) version is cnstructed by blend of carbon fiber T700+T800. 3: UL(Ultra-Lightweight) version is constructed by fully carbon fiber T800 .
    HUBS
    Model: DT SWISS 180, DT SWISS 240 EXP, DT SWISS 350, Hope Pro 4, Bitex BX211F / BX211R, Bitex BX212F / BX212R Front Axle Size: 15*100mm, 15*110mm BOOST, 15 *100mm Torque, 15*110mm RS-1, 15*110mm Torque, 20*110mm, 20*110mm BOOST DH, Lefty 2.0 , QR*100mm Rear Axle Size: 12*142mm, 12*148mm BOOST, 12*157mm Super BOOST, 12*150mm, 12*157mm, QR*135mm, Single Speed Driver Body: Shimano MTB 10/11S, Sram XD, Shimano MTB 10/11S Alloy, Sram XD Alloy, Shimano Micro Spline, Shimano Micro Spline Alloy Hole: 28H,32H
    OTHER PARTS
    Spokes: Sapim CX-Ray,Sapim Race,Pillar 1420,Pillar 1423,Sapim Leader Nipples: Aluminium Black, Aluminium Red, Brass Black, Aluminium Blue, Aluminium Gold, Aluminium Green, Aluminium Orange, Aluminium Purple
  • All of our EIE rims share the following manufacturing technologies:

    1.Super light Weight

    T700:The standard XC/AM/DH version were constructed Premium Toray T700 Carbon fiber.

    T700+T800 component:The super light series EIE carbon rim were constructed with properly component of Toray T700+T800.We cut the material size of the nipple bead area and strengthen the key parts of spokes to maintain the strength of the overall carbon rims.


    2.Layer-up

    The layer-up of each carbon rim is carefully designed, repeated tests and then determine final standards document. After that,we’ll send it to our layer up workers, who operate according to the operating standards.

    They cut the size of the material according to the layer- up instructions to produce materials for any part that can be used to increase the strength of the side part of the wheel set, to fit the grooves of the rims, to enhance the impact resistance of the wheels.

    All EIE's carbon rims were manufactured by a one-piece continuous layer. This uninterrupted layer not only produces a stronger rim, but a lighter one!


    3.Angled Hole Drilled By CNC Machine

    The spoke hole angle design of the rim is very important , but its design angle range is limited .

    If the design does not match the design of the spoke hole angle of the hub , the bending phenomenon of the spoke can be generated .

    When our EIE carbon rims drill angled holes, the spacing and angle of each hole are calculated accurately to ensure that when the rim is connected to the drum through the stripes, no additional pressure is generated around the rim hole.

    We use a high speed CNC machine to drill all the holes to avoid spoke holes area carbon fiber strength reduction ,thus making the wheels build stronger


    4.Smooth Rim Inside Surface

    The air bladders are made from a special material which has ability to produce very smoother walls, result in a lighter rim, and are completely removed without harsh chemicals.

    They are removed through the valve hole with a unique process by a skillful workers .So you would not see any patched hole on rim bed,that produces a stronger rim.

  • EIE Carbon offers this warranty is aimed to ensure that all products we sell are free from defects and all passed the QC test before shipment.
    EIE Carbon carries 2 years warranty (from the date of purchase) for all carbon bike rims we sell including the existing MTB rims,road rims,fat bike rims,BMX rims and upcoming new models.

    EIE Carbon Offers Warranty For Rims

    1.Within six months from date of purchase
    If the rim quality issue is caused by manufacturing defects.EIE Carbon will send you the free replacement rims and bear the re-sending freight,but other expenses shall be adsorbed by the buyer.

    2.After six months from date of purchase
    Free replace the damaged rims.EIE Carbon and customer shall bear 50% of the freight cost respectively.

    EIE Carbon Offers Warranty For Wheels

    1.Within 6 months from the date of purchase

    1.)Used wheels:
    If the wheels quality is casued by manufacturing defects of rims.EIE Carbon will send you the free replacement rim and bear the reshipment's freight.Meanwhile,we will reimburse the customer with US$30 for the wheels rebuild fee at their local bike shop,but other expenses shall be adsorbed by the customer.

    2.)Unused wheels:
    If the wheels quality is caused by rim manufacturing defects.Then customer is not allowed to use the wheels.EIE has right to ask buyer to send the whole wheels back to us.We will resend new wheels to customer after receiving the returned package within 2 weeks.In this case,EIE will bear the shipping cost for the returned package US$50 at best as well as the shipping cost for reshipment.The shipping cost for returned package will be refunded to customer by PayPal.The other expenses shall be adsorbed by the buyer.

    If the wheels quality is caused by rim manufacturing defects and EIE does not need customer to return it to us.EIE will send the new replacement rims to customer and bear the reshipment's cost.Meanwhile,we will reimburse the customer with US$30 for the wheels rebuild fee at their local bike shop,but other expenses shall be adsorbed by the buyer.

    Other problemds like hubs ,spoke or nipples ,please contact customer service for assistance.We will tell you how to fix it after getting your information.

    2.Six months after the date of purchase
    If the wheels quality is caused by rim manufacturing defects.EIE Carbon will send the replacement rim as well as bear the reshipments freight.But other expenses shall be adsorbed by the buyer.

    More at WARRANTY page.
GUESTBOOK
  • visitor Anders 2020-12-13
    I wonder if any of the rimes are manufactured in a sealed atmosphere so it's not requires any retouching after the mold. No sanding or varnishing, the finish is exceptional! A "newer" technology I see Duke 6TERS and Light Bicycle RECON Pro are using.

    EIE EIE Carbon:

    Hi Anders, Thanks for the inquiry. I thought you are requiring new finish technology called"Paintless"/"No Paint" finish .Our new DFB (Conformt MTB seriel) are offering paintless finish.We sent a finish photos to you via email,please check. If further questions ,welcome to email us to do further discussion. Thanks EIE Carbon

    2020-12-14

    visitor Kamil:

    Bought these rims laced to the new DT Swiss 240EXP hubs, Sapim CX-Ray Spokes and Aluminum nipples (built by EIE). These wheels are amazing! They came in at 1293g for the wheelset (without rim tape or valves). They feel like my aluminum rims in that they're compliant and comfortable to ride on but unlike the AL rims, these are rockets on the acceleration front. I tried out a friends Light Bicycle XC wheelset and it was VERY stiff and harsh (even on a FS bike). These are night and day. I love riding them. They finish was exceptional and I have a video of the rim surface somewhere. If you're looking for an XC wheelset, do not hesitate to take these or the 30mm ID version. P.S. I had them checked after a couple months of use over at my bike shop by a well regarded mechanic that EVERYONE I know uses and he reiterated that these wheels were built very well, spoke tension was even all around, and generally he was impressed.

    2020-12-17

    EIE EIE Carbon:

    Thank you so much for your feedback ,Kamil. We are very appreciated for your affirmation. We wish you have a great cycling ! Thanks EIE Carbon

    2020-12-18

    Reply
  • visitor Fabian 2021-12-10
    j'aimerai connaitre le prix pour 2x A29C26D18 UDmat 28 trous expedition et taxe pour la France

    EIE EIE Carbon:

    @Fabian We already sent quotation to your inbox ,please check. If any questions ,feel free to contact us for further discussion. Thanks EIECarbon

    2021-12-13

    Reply
  • visitor Fabrice 2022-03-11
    Hello, Would it be possible to order only one rear wheel for a mountain bike. Cordially, Fabrice

    EIE EIE Carbon:

    @Fabrice Thank you for your inquiry ,this is Pretty from EIE Carbon. It has no problem to order only rear wheels,could you please advise us the detailed specs you want?And where is your destination?Then we can quote you for reference . Thanks Eiecarbon

    2022-03-15

    Reply

SEND MY REQUEST