Product Option Unit Price($) QTY(PCS)

A29C39D25 29er 45mm wide rim all mountain Enduro strong bicycle carbon rim, tubeless ready, “mid fat bike” rim

A29C39D25 29er 45mm wide rim all mountain Enduro strong bicycle carbon rim, tubeless ready, “mid fat bike” rim EIE Carbon
Hole:
Finish:
Weave:
Unit Price:$165.00
PCS
Add To Cart
SUCCESSFULLY ADDED YOUR CART !
Go To My Cart
Price(USD/PCS):
$165.00
Use:
mountain, sand, snow, trail
Size:
29er
Material:
full carbon Toray T700
Type:
clincher(beadless/hook-less)
Weight:
AM:460+/-15g, DH:510+/-15g
Tubeless Compatible:
Yes
Spoke Hole:
16H to 36H
Internal Hole:
center/offset
ERD:
589mm
Inner Width:
39mm
Outer Width:
45mm
Depth:
25mm
Spoke hole drilling:
+/-6 deg
Spoke hole offset:
+/-6mm
Max Weight Limit:
130kg
Max Spoke Tension:
160kgf
Cycling Tyre Pressure:
15psi(recommend)
Finish:
matte/glossy
Decal:
customized
Weave:
UD/3K/12k
Warranty:
1 years
Lead Time:
8 days
Item NO.:
A29C39D25

Technology of rim

A29C39D25 29er 45mm wide rim all mountain Enduro strong bicycle carbon rim, tubeless ready, “mid fat bike” rim

* 29er+ rim, mid fat bike rim and fat race are what this thing is all about. Perfect for sand, snow, trail, and everything in between.

* Plus bikes introduce a new level of comfort for stiff riding. It brings into a line of trail bikes and all mountain riding.

* The increases are in control, traction and tire stability with the design of the new bikes, agility and handling are not compromised. 

* Developing the bikes with low air pressure(15psi approximately), we fully believed in the ultimate control, traction and speed of the bikes.

* Double wall for increased stiffness and tubeless ready. Please use a kind of yellow tape, sealant and tubeless tire if run for tubeless.

* The 29 plus bikes are not as heavy as they look and climbing performance is about the same for most riders. The 2.8 size is an ideal balance of added traction with minimal added rolling resistance.

* Not only does the design add strength, but it also keeps weight competitive. The 29 inch mtb weight is 490g+/-15 only.

2017-05-08
Robin Grant :

Hi - what is the weight of AM version of these rims? It says 460g in the table and 490g in the description? Also what would be the price if I bought 4 rims together?

2017-05-08
Eie carbon :

Hello Robin Thanks for your inquiry . Sorry for our info fault . 1.what is the weight of AM version of these rims? It says 460g in the table and 490g in the description? ----The A29C39 carbon rim AM version weight is 460+/-15grams , not 490gram ,it is mistake in the description . Thank u for your remind . 2.Also what would be the price if I bought 4 rims ---May i know where is your destination , i checked whether i can give u discount on total amount . Looking for working with u in future . Thanks Eiecarbon

Reply
Name:
Mail:
Message:
Submit
2017-01-09
Greg Hughes :

Can you build a wheelset with A29C39D25 rims, 32h Boost DT-Swiss 240s 6-bolt disc hubs, Sapim CX-Ray, and aluminum nipples?

2017-01-09
Eie carbon :

Hello Greg Thanks for your inquiry . Yes,we can build one pair A29C39D25 wheelset with 32h Boost DT-Swiss 240s 6-bolt disc hubs, Sapim CX-Ray, and aluminum nipples. But now 32H Boost DT-Swiss 240s 6-bolt Disc hubs has been out of stock . We will get in stock at the end of February . Could u be patient to wait that time . If lead time is ok ,i will quote for u . Thanks Eiecarbon

Reply
Name:
Mail:
Message:
Submit
2016-10-29
Tom :

Are the spoke holes drilled straight (at 90 degree angle to the rim surface)? Or are they /- 4 to 6 degrees so that the nipples are in line with the spoke angle to the hub flange?

2016-10-31
Eie carbon :

Hello Tom Thanks for your inquiry . A29C39 carbon rims spoke holes does not drill straight , they drill +/-6 degree so that the nipples are in line with the spoke angle to the hub flange . Angled spoke holes allows the nipple to pull straight in line with the spoke for reduced stress. This results in fewer broken spokes and nipples. Hope this info will help u . Thanks Eiecarbon

Reply
Name:
Mail:
Message:
Submit
2016-06-13
Christophe :

Hi can you make a front wheel of your 45mm width rim with a predictive steering hub? DT Swiss 240 hubs? Thanxs in advance!

2016-06-13
Eie carbon :

Hello Christophe, We can build the U45mm wheels for you but not with predictive steering hub. DT Swiss 240 has a new predictive steering hub, and it is a new version. Thank you. Eie Carbon

Reply
Name:
Mail:
Message:
Submit
Name:
Mail:
Message:
Submit